-
- Book chapters, 2017, 2012
- Journal Papers, 2018, 2017, 2016, 2014, 2013, 2012, 2011, 2009, 2006, 2005, 2003, 1998, 1997
- Conference Papers, 2018, 2017, 2016, 2011, 2010, 2008, 2006, 2005, 2004, 2002, 2001, 2000, 1999, 1998, 1997, 1996
- Doctoral Theses, 2018, 2011
- Licentiate Theses, 2008, 2004, 2002, 1997
- Departmental Reports, 2018
- Master's Theses, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2009, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1995
|
Book chapters
2017
|
[Eriksson et al., 2017]
   |
Dynamic Modeling, Simulation and Control of Turbochargers. Lars Eriksson, Xavier Llamas, Kristoffer Ekberg, and Viktor Leek (2017). pp. 176--206. Nova Science Publishers, Inc..
|
2012
|
[Höckerdal et al., 2012]
   |
Off- and On-Line Identification of Maps Applied to the Gas Path in Diesel Engines. Erik Höckerdal, Lars Eriksson, and Erik Frisk (2012). Volume 418 of Identification for Automotive Systems, In Lecture Notes in Control and Information Sciences. Editors: D. Alberer, H. Hjalmarsson
and L. del Re.. pp. 241--256. Springer Verlag.
|
Journal Papers
2018
|
[Nielsen et al., 2018]
   |
Adaptive Observer for Nonlinearly Parameterized Hammerstein System With Sensor Delay--Applied to Ship Emissions Reduction. Kr\aen Vodder Nielsen, Mogens Blanke, and Lars Eriksson (2018). In: IEEE Transactions on Control Systems Technology, 26(4):1508--1515.
|
|
[Nielsen et al., 2018]
  |
Marine diesel engine control to meet emission requirements and maintain maneuverability. Kraen Vodder Nielsen, Mogens Blanke, Lars Eriksson, and Morten Vejlgaard-Laursen (2018). In: Control Engineering Practice, 76(12-21).
|
|
[Shen and Eriksson, 2018]
  |
Editorial: Special focus on learning and real-time optimization of automotive powertrain systems. Tielong Shen, and Lars Eriksson (2018). In: Science China Information Sciences, 61(7).
|
|
[Höckerdal et al., 2018]
   |
Real-Time Performance of DAE and ODE Based Estimators Evaluated on a Diesel Engine. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2018). In: Science China Information Sciences, 61(7).
|
|
[Llamas and Eriksson, 2018]
  |
Control-oriented modeling of two-stroke diesel engines with EGR for marine applications. Xavier Llamas, and Lars Eriksson (2018). In: Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, .
|
2017
|
[Llamas and Eriksson, 2017]
   |
Control-Oriented Compressor Model with Adiabatic Efficiency Extrapolation. Xavier Llamas, and Lars Eriksson (2017). In: SAE International Journal of Engines, 10(4).
|
|
[Nielsen et al., 2017]
   |
Adaptive feedforward control of exhaust recirculation in large diesel engines. Kr\aen Vodder Nielsen, Mogens Blanke, Lars Eriksson, and Morten Vejlgaard-Laursen (2017). In: Control Engineering Practice, 65:26--35.
|
2016
|
[Llamas and Eriksson, 2016]
   |
Parameterizing Compact and Extensible Compressor Models Using Orthogonal Distance Minimization. Xavier Llamas, and Lars Eriksson (2016). In: Journal of Engineering for Gas Turbines and Power, 139(1).
|
|
[Leufven and Eriksson, 2016]
   |
Measurement, analysis and modeling of centrifugal compressor flow for low pressure ratios. Oskar Leufven, and Lars Eriksson (2016). In: International Journal of Engine Research, 153(2):153--168.
|
2014
|
[Eriksson, 2014]
  |
A European Perspective on Collaborative Research in Modeling and Control of Turbocharged Engines. Lars Eriksson (2014). In: Journal of the Society of Instrument and Control Engineers, 53(8):716--724.
|
|
[Thomasson and Eriksson, 2014]
   |
Co-Surge in Bi-Turbo Engines - Measurements, Analysis and Control. Andreas Thomasson, and Lars Eriksson (2014). In: Control Engineering Practice, 32:113--122.
|
2013
|
[Leufvén and Eriksson, 2013]
   |
A Surge and Choke Capable Compressor Flow Model - Validation and Extrapolation Capability. Oskar Leufvén, and Lars Eriksson (2013). In: Control Engineering Practice, 21(12):1871--1883.
|
|
[Guardiola et al., 2013]
   |
A computationally efficient Kalman filter based estimator for updating look-up tables applied to NOx estimation in diesel
engines. Carlos Guardiola, Benjamin Pla, David Blanco-Rodriguez, and Lars Eriksson (2013). In: Control Engineering Practice, 21(11):1455--1468.
|
|
[Thomasson et al., 2013]
   |
Modeling and validation of a boost pressure actuation system for a series sequentially turbocharged SI engine. Andreas Thomasson, Oskar Leufvén, Ivan Criscuolo, and Lars Eriksson (2013). In: Control Engineering Practice, 21:1860--1870.
|
|
[Wahlström and Eriksson, 2013]
   |
Output Selection and Its Implications for MPC of EGR and VGT in Diesel Engines. Johan Wahlström, and Lars Eriksson (2013). In: IEEE Transactions on Control Systems Technology, 21(3):932--940.
|
2012
|
[Leufven and Eriksson, 2012]
   |
Investigation of Compressor Correction Quantities for Automotive Applications. Oskar Leufven, and Lars Eriksson (2012). In: International Journal of Engine Research, 13(6):588--606.
|
2011
|
[Höckerdal et al., 2011]
   |
EKF-based Adaptation of Look-Up Tables with an Air Mass-Flow Sensor Application. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2011). In: Control Engineering Practice, 19(5):442--453.
|
2009
|
[Andersson and Eriksson, 2009]
   |
A Parametric Model for Ionization Current in a Four Stroke SI Engine. Ingemar Andersson, and Lars Eriksson (2009). In: ASME Journal of Dynamic Systems, Measurement, and Control, 113(2):11 pages.
|
|
[Höckerdal et al., 2009]
   |
Observer Design and Model Augmentation for Bias Compensation With a Truck Engine Application. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2009). In: Control Engineering Practice, 17(3):408--417.
|
2006
|
[Klein et al., 2006]
   |
Compression Ratio Estimation based on Cylinder Pressure Data. Marcus Klein, Lars Eriksson, and Jan Åslund (2006). In: Control Engineering Practice, 14(3):197--211.
|
2005
|
[Eriksson, 2005]
   |
CHEPP -- A Chemical Equilibrium Program Package for Matlab. Lars Eriksson (2005). In: SAE Transactions, Journal of Fuels and Lubricants, 2004-01-1460, 4(113):730--741.
|
|
[Klein and Eriksson, 2005]
   |
A specific heat ratio model for single-zone heat release models. Marcus Klein, and Lars Eriksson (2005). In: SAE 2004 Transactions Journal of Engines, 2004-01-1464, .
|
2003
|
[Eriksson and Nielsen, 2003]
   |
Towards On-Board Engine Calibration with Feedback Control Incorporating Combustion Models and Ion-sense. Lars Eriksson, and Lars Nielsen (2003). In: at -- Automatisierungstechnik, 51(5):204--212.
|
|
[Klein et al., 2003]
   |
Compression Estimation from Simulated and Measured Cylinder Pressure. Marcus Klein, Lars Eriksson, and Ylva Nilsson (2003). In: SAE 2002 Transactions Journal of Engines, 2002-01-0843, 111(3).
|
|
[Eriksson, 2003]
   |
Mean Value Models for Exhaust System Temperatures. Lars Eriksson (2003). In: SAE 2002 Transactions, Journal of Engines, 2002-01-0374, 111(3).
|
1998
|
[Nielsen and Eriksson, 1998]
   |
An Ion-Sense Engine-Fine-Tuner. Lars Nielsen, and Lars Eriksson (1998). In: IEEE Control Systems, 18(5):43--52.
|
|
[Eriksson, 1998]
   |
Requirements for and a Systematic Method for Identifying Heat-Release Model Parameters. Lars Eriksson (1998). In: SAE Transactions, Journal of Engines, 107:898--908. SAE Techincal Paper Number 980626.
|
|
[Eriksson et al., 1998]
   |
Closed Loop Ignition Control by Ionization Current Interpretation. Lars Eriksson, Lars Nielsen, and Mikael Glavenius (1998). In: SAE Transactions, Journal of Engines, 106(SAE Technical Paper 970854):1216--1223.
|
1997
|
[Eriksson and Nielsen, 1997]
   |
Ionization Current Interpretation for Ignition Control in Internal Combustion Engines. Lars Eriksson, and Lars Nielsen (1997). In: Control Engineering Practice, 5(8):1107--1113.
|
|
[Eriksson et al., 1997]
   |
Ignition Control by Ionization Current Interpretation. Lars Eriksson, Lars Nielsen, and Jan Nytomt (1997). In: SAE Transactions, Journal of Engines, 105(SAE Technical Paper 960045):165--171.
|
Conference Papers
2018
|
[Thomasson et al., 2018]
   |
Cylinder Pressure Based Cylinder Charge Estimation in Diesel Engines with Dual Independent Variable Valve Timing. Andreas Thomasson, Sepideh Nikkar, and Erik Höckerdal (2018). In: SAE 2018 World Congress & Exhibition. Volume SAE Technical Paper 2018-01-0862. Detroit, United States.
|
2017
|
[Eriksson and Thomasson, 2017]
   |
Cylinder state estimation from measured cylinder pressure traces - A Survey. Lars Eriksson, and Andreas Thomasson (2017). In: IFAC World Congress. Toulouse, France.
|
|
[Sivertsson and Eriksson, 2017]
   |
Optimal Powertrain Lock-Up Transients for a Heavy Duty Series Hybrid Electric Vehicle. Martin Sivertsson, and Lars Eriksson (2017). In: IFAC World Congress. Toulouse, France.
|
|
[Thomasson et al., 2017]
   |
Turbo Speed Estimation Using Fixed-Point Iteration. Andreas Thomasson, Xavier Llamas, and Lars Eriksson (2017). In: SAE 2017 World Congress & Exhibition. Volume SAE Technical Paper 2017-01-0591. Detroit, United States.
|
|
[Llamas and Eriksson, 2017]
   |
Control-Oriented Compressor Model with Adiabatic Efficiency Extrapolation. Xavier Llamas, and Lars Eriksson (2017). In: SAE 2017 World Congress & Exhibition. Volume SAE Technical Paper 2017-01-1032. Detroit, MI, USA.
|
2016
|
[Ekberg and Eriksson, 2016]
  |
The Effect of Pressure Losses on Measured Compressor Efficiency. Kristoffer Ekberg, and Lars Eriksson (2016). In: 9th EUROSIM Congress on Modelling and Simulation. Oulu, Finland.
|
2011
|
[Höckerdal et al., 2011]
   |
Bias Reduction in DAE Estimators by Model Augmentation: Observability Analysis and Experimental Evaluation. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2011). In: 50th IEEE Conference on Decision and Control. Orlando, Florida, USA.
|
|
[Criscuolo et al., 2011]
   |
Model-based boost pressure control with system voltage disturbance rejection. Ivan Criscuolo, Oskar Leufven, Andreas Thomasson, and Lars Eriksson (2011). In: IFAC World Congress. Milano, Italy.
|
|
[Leufven and Eriksson, 2011]
   |
Surge and Choke Capable Compressor Model. Oskar Leufven, and Lars Eriksson (2011). In: IFAC World Congress. Milano, Italy.
|
2010
|
[Höckerdal et al., 2010]
   |
Model Based Engine Map Adaptation Using EKF. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2010). In: 6th IFAC Symposium on Advances in Automotive Control. Munich, Germany.
|
2008
|
[Höckerdal et al., 2008]
   |
Observer Design and Model Augmentation for Bias Compensation Applied to an Engine. Erik Höckerdal, Erik Frisk, and Lars Eriksson (2008). IFAC World Congress. Seoul, Korea.
|
2006
|
[Klein and Eriksson, 2006]
   |
Methods for Cylinder Pressure Based Compression Ratio Estimation. Marcus Klein, and Lars Eriksson (2006). In: Electronic Engine Control. Volume 2006-01-0185 of SAE Technical paper series SP-2003. SAE World Congress, Detroit, USA.
|
2005
|
[Klein and Eriksson, 2005]
   |
Utilizing Cylinder Pressure Data for Compression Ratio Estimation. Marcus Klein, and Lars Eriksson (2005). IFAC World Congress. Prague, Czech Republic.
|
|
[Andersson and Eriksson, 2005]
   |
Observer Based Feedforward Air-Fuel Control of Turbocharged SI-Engines. Per Andersson, and Lars Eriksson (2005). IFAC World Congress. Prague, Czech Republic.
|
|
[Andersson et al., 2005]
   |
Sensor Selection for Observer Feedback in Turbocharged Spark Ignited Engines. Per Andersson, Erik Frisk, and Lars Eriksson (2005). IFAC World Congress. Prague, Czech Republic.
|
|
[Nilsson and Frisk, 2005]
   |
Detecting Knock in Spark Ignited Engines. Ylva Nilsson, and Erik Frisk (2005). IFAC World Congress. Prague, Czech Republic.
|
2004
|
[Klein et al., 2004]
   |
Compression ratio estimation based on cylinder pressure data. Marcus Klein, Lars Eriksson, and Jan Åslund (2004). IFAC Symposium on Advances in Automotive Control. Salerno, Italy, pp. 314--319.
|
|
[Klein and Eriksson, 2004]
   |
A specific heat ratio model for single-zone heat release models. Marcus Klein, and Lars Eriksson (2004). In: Modeling of SI Engines. Volume 2004-01-1464 of SAE Technical paper series SP-1830.
|
|
[Klein and Eriksson, 2004]
   |
A comparison of specific heat ratio models for cylinder pressure modeling. Marcus Klein, and Lars Eriksson (2004). CCSSE. Norrköping, Sweden.
|
|
[Andersson and Eriksson, 2004]
   |
Mean-value Observer for a Turbocharged SI-engine. Per Andersson, and Lars Eriksson (2004). IFAC Symposium on Advances in Automotive Control. Salerno, Italy, pp. 146--151.
|
|
[Andersson and Eriksson, 2004]
   |
Cylinder Air Charge Estimator in Turbocharged SI-Engines. Per Andersson, and Lars Eriksson (2004). In: Electronic Engine Contols. Volume 2004-01-1366 of SAE Technical paper series SP-1822.
|
|
[Nilsson and Eriksson, 2004]
   |
Determining TDC Position using Symmetry and other Methods. Ylva Nilsson, and Lars Eriksson (2004). In: Modeling of Spark Ignition Engines. Volume 2004-01-1458 of SAE Technical paper series SP-1830.
|
2002
|
[Klein and Eriksson, 2002]
   |
Models, methods and performance when estimating the compression ratio based on the cylinder pressure. Marcus Klein, and Lars Eriksson (2002). CCSSE. Norrköping, Sweden.
|
|
[Eriksson et al., 2002]
   |
Control and Optimization of Turbo Charged Spark Ignited Engines. Lars Eriksson, Simon Frei, Christopher Onder, and Lino Guzzella (2002). IFAC World Congress. Barcelona, Spain.
|
|
[Eriksson, 2002]
   |
Mean Value Models for Exhaust System Temperatures. Lars Eriksson (2002). In: Modeling of SI engines. Volume SAE Technical Paper 2002-01-0374 of SP-1702.
|
|
[Klein et al., 2002]
   |
Compression Estimation from Simulated and Measured Cylinder Pressure. Marcus Klein, Lars Eriksson, and Ylva Nilsson (2002). In: Electronic Engine Controls. Volume SAE Technical Paper 2002-01-0843 of SP-1704.
|
2001
|
[Andersson and Eriksson, 2001]
    |
Air-to-Cylinder Observer on a Turbocharged SI-Engine with Wastegate. Per Andersson, and Lars Eriksson (2001). In: Electronic Engine Controls. Volume SP-1585SAE Technical Paper 2001-01-0262. pp. 33--40. SAE 2001 World Congress, March 2001, Detroit, MI, USA.
|
|
[Andersson, 2001]
   |
Comparison of two Exhaust Manifold Pressure Estimation Methods. Per Andersson (2001). CCSSE. Norrköping, Sweden, pp. 287--295.
|
2000
|
[Andersson and Eriksson, 2000]
   |
Ion Sensing for Combustion Stability Control of a Spark Ignited Direct Injected Engine. Ingemar Andersson, and Lars Eriksson (2000). In: Electronic Engine Controls: Controls. Volume SP-1500SAE Technical Paper 2000-01-0552. SAE 2000 World Congress, March 2000, Detroit, MI, USA.
|
1999
|
[Andersson and Eriksson, 1999]
 |
Ion Current Interpretation for Sensing and Control of Combustion Stability. Ingemar Andersson, and Lars Eriksson (1999). In: Second conference on Computer Science and Systems Engineering in Linköping. pp. 119--124.
|
1998
|
[Eriksson, 1998]
   |
Requirements for and a Systematic Method for Identifying Heat-Release Model Parameters. Lars Eriksson (1998). In: Modeling of SI and Diesel Engines. Volume SP-1330SAE Technical Paper no. 980626. pp. 19--30.
|
1997
|
[Eriksson et al., 1997]
   |
Closed Loop Ignition Control by Ionization Current Interpretation. Lars Eriksson, Lars Nielsen, and Mikael Glavenius (1997). In: Electronic Engine Controls. Volume SP-1236SAE Technical Paper 970854. pp. 159--166. SAE International Congress and Exposition, Detroit, MI, USA.
|
1996
|
[Nielsen and Eriksson, 1996]
  |
Ionization Current Interpretation for Ignition Control in Internal Combustion Engines. Lars Nielsen, and Lars Eriksson (1996). Volume Q. pp. 117--122.
|
Doctoral Theses
2018
|
[Llamas, 2018]
   |
Modeling and Control of EGR on Marine Two-Stroke Diesel Engines. Xavier Llamas (2018). PhD thesis, No. 1904, Linköping University.
|
2011
|
[Höckerdal, 2011]
   |
Model Error Compensation in ODE and DAE Estimators with Automotive Engine Applications. Erik Höckerdal (2011). PhD thesis, No. 1366, Linköping University.
|
Licentiate Theses
2008
|
[Höckerdal, 2008]
   |
Observer Design and Model Augmentation for Bias Compensation with Engine Applications. Erik Höckerdal (2008). Lic thesis, Linköping University. LiU-TEK-LIC-2008:48, Thesis No. 1390.
|
2004
|
[Klein, 2004]
   |
A specific heat ratio model and compression ratio estimation. Marcus Klein (2004). Lic thesis, Linköpings Universitet. LiU-TEK-LIC-2004:33, Thesis No. 1104.
|
2002
|
[Andersson, 2002]
   |
Intake Air Dynamics on a Turbocharged SI-Engine with Wastegate. Per Andersson (2002). Lic thesis, Linköpings Universitet. LiU-TEK-LIC-2002:07, Thesis No. 934.
|
1997
|
[Eriksson, 1997]
  |
Closed-Loop Spark-Advance Control using the Spark Plug as Ion Probe. Lars Eriksson (1997). Lic thesis, Linköpings Universitet. LiU-TEK-LIC-1997:14, Thesis No. 613.
|
Departmental Reports
2018
|
[Llamas and Eriksson, 2018]
   |
LiU CPgui: A Toolbox for Parameterizing Compressor Models. Xavier Llamas, and Lars Eriksson (2018). Technical Report Nr. LiTH-ISY-R-3102. Department of Electrical Engineering, Linköpings Universitet, SE-581 83 Linköping, Sweden.
|
Master's Theses
2017
|
[Nikkar, 2017]
   |
Estimation of In-cylinder Trapped Gas Mass and Composition. Sepideh Nikkar (2017). Masters thesis, LiTH-ISY-EX--17/5073--SE, Linköping University, SE-581 83 Linköping.
|
2016
|
[Klasén, 2016]
   |
Modeling and Estimation of Long Route EGR Mass Flow in a Turbocharged Gasoline Engine. Erik Klasén (2016). Masters thesis, LiTH-ISY-EX--16/4985--SE, Linköping University, SE-581 83 Linköping.
|
|
[Verem and Kerai, 2016]
   |
Physically Based Models for Predicting Exhaust Temperatures in SI Engines. Andrej Verem, and Hiren Kerai (2016). Masters thesis, LiTH-ISY-EX--16/4943--SE, Linköping University, SE-581 83 Linköping.
|
2015
|
[Ekberg, 2015]
   |
Effects of non ideal inlet and outlet pipes on measured compressor efficiency. Kristoffer Ekberg (2015). Masters thesis, LiTH-ISY-EX--15/4860--SE, Linköpings universitet, SE-581 83 Linköping.
|
|
[Bengtsson, 2015]
   |
A Control-Oriented 0D Model of a Turbocharger Gas Stand Including Heat Transfer. Mikael Bengtsson (2015). Masters thesis, LiTH-ISY-EX--15/4849--SE, Linköpings universitet, SE-581 83 Linköping.
|
2014
|
[Höglund, 2014]
   |
Knock Detection in a Two-Stroke Engine to be Used in the Engine Management System. Filip Höglund (2014). Masters thesis, LiTH-ISY-EX--14/4744--SE, Linköpings universitet, SE-581 83 Linköping.
|
2013
|
[Boström, 2013]
   |
On Estimation of Momentary Average Engine Speed and Acceleration. Per Boström (2013). Masters thesis, LiTH-ISY-EX--13/4667--SE, Linköpings universitet, SE-581 83 Linköping.
|
2012
|
[Carlsson, 2012]
   |
Modeling and Experimental Validation of a Rankine Cycle Based Exhaust WHR System for Heavy Duty Appliations. Carin Carlsson (2012). Masters thesis, LiTH-ISY-EX--12/4595--SE, Linköping University, SE-581 83 Linköping.
|
|
[Ingeström and Hansson, 2012]
   |
A Method for Estimating Soot Load in a DPF Using an RF-based Sensor. Victor Ingeström, and John Hansson (2012). Masters thesis, LiTH-ISY-EX--12/4584--SE, Linköping University, SE-581 83 Linköping.
|
2011
|
[Berggren and Melin, 2011]
   |
UKF and EKF with time dependent measurement and model uncertainties for state estimation in heavy duty diesel engines. Henrik Berggren, and Martin Melin (2011). Masters thesis, LiTH-ISY-EX--11/4484--SE, Linköping University, SE-581 83 Linköping.
|
2009
|
[Ainouz and Vedholm, 2009]
   |
Mean Value Model of the Gas Temperature at the Exhaust Valve. Filip Ainouz, and Jonas Vedholm (2009). Masters thesis, LiTH-ISY-EX-09/4296--SE, Linköping University, SE-581 83 Linköping.
|
|
[Bergström and Höckerdal, 2009]
   |
Model Based Diagnosis of the Intake Manifold Pressure on a Diesel Engine. Christoffer Bergström, and Gunnar Höckerdal (2009). Masters thesis, LiTH-ISY-EX-09/4290--SE, Linköping University, SE-581 83 Linköping.
|
2006
|
[Falkeborn, 2006]
   |
Evaluation of Differential Algebraic Elimination Methods for Deriving Consistency Relations from an Engine Model. Rikard Falkeborn (2006). Masters thesis, LiTH-ISY-EX-06/3899--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Hansen and Molin, 2006]
   |
Design and Evaluation of an Automatically Generated Diagnosis System. Joakim Hansen, and Jens Molin (2006). Masters thesis, LiTH-ISY-EX-06/3889--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Svärd and Wassén, 2006]
   |
Development of Methods for Automatic Design of Residual Generators. Carl Svärd, and Henrik Wassén (2006). Masters thesis, LiTH-ISY-EX-06/3888--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Wikström, 2006]
   |
Yaw Rate and Lateral Acceleration Sensor Plausibilisation in an Active Front Steering Vehicle. Anders Wikström (2006). Masters thesis, LiTH-ISY-EX-06/3818--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Jerhammar and Höckerdal, 2006]
   |
Gas flow observer for a Scania diesel engine with VGT and EGR. Andreas Jerhammar, and Erik Höckerdal (2006). Masters thesis, LiTH-ISY-EX-06/3807--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Blom, 2006]
   |
Analys av precision vid fällning av ostyrda vapen från JAS39 Gripen. Lina Blom (2006). Masters thesis, LiTH-ISY-EX-06/3802--SE, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Bengtsson, 2006]
   |
Estimation of Indicated and Load Torque from Engine Speed Variations. Fredrik Bengtsson (2006). Masters thesis, LiTH-ISY-EX-06/3793--SE, Linköpings Universitet, SE-581 83 Linköping.
|
2005
|
[Johansson and Waller, 2005]
   |
Control Oriented Modeling of the Dynamics in a Catalytic Converter. Jenny Johansson, and Mikaela Waller (2005). Masters thesis, LiTH-ISY-EX-3707-2005, Linköpings Universitet, SE-581 83 Linköping.
|
2004
|
[Mellblom, 2004]
   |
Start Modelling for heavy trucks. Fredrik Mellblom (2004). Masters thesis, LiTH-ISY-EX-3560-2004, Linköpings Universitet, SE-581 83 Linköping.
|
2003
|
[Sinnerstad, 2003]
   |
Knock Intensity and Torque Conrol on an SVC Engine. Klara Sinnerstad (2003). Masters thesis, LiTH-ISY-EX-3497-2003, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Ivansson, 2003]
   |
Estimation of the Residual Gas Fraction in an HCCI-engine using Cylinder Pressure. Niklas Ivansson (2003). Masters thesis, LiTH-ISY-EX-3441-2003, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Karlsson, 2003]
 |
Development of a Time-Variant Discrete Observer for Cylinder Head Temperature Estimation. Niclas Karlsson (2003). Masters thesis, LiTH-ISY-EX-3403-2003, Linköpings Universitet, SE-581 83 Linköping.
|
2002
|
[Bergstedt, 2002]
 |
A sliding Mode Observer for a nonlinear temperature estimation in a cylinderhead of a diesel engine. Erika Bergstedt (2002). Masters thesis, LiTH-ISY-EX-3255-2002, Linköpings Universitet, SE-581 83 Linköping.
|
2001
|
[Hallor, 2001]
 |
Observer for a Fuel Injection Valve with a Piezoelectric Stack Actuator. Mattias Hallor (2001). Masters thesis, LiTH-ISY-EX-3220, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Öberg, 2001]
   |
Identification and Improvements of an Automotive Diesel Engine Model purposed for Model Based Diagnosis. Sven Öberg (2001). Masters thesis, LiTH-ISY-EX-3161, Linköpings Universitet, SE-581 83 Linköping.
|
2000
|
[Bruce, 2000]
   |
Estimation of the EGR rate in a GDI engine working in stratified mode using the ionization current. Mattias Bruce (2000). Masters thesis, LiTH-ISY-EX-3083, Linköpings Universitet, SE-581 83 Linköping.
|
|
[Järgenstedt, 2000]
   |
Detecting Start of Combustion using Knock Sensor Signals. Mats Järgenstedt (2000). Masters thesis, LiTH-ISY-EX-3035, Linköpings Universitet, SE-581 83 Linköping.
|
1995
|
[Eriksson, 1995]
  |
Methods for Ionization Current Interpretation to be Used in Ignition Control. Lars Eriksson (1995). Masters thesis, LiTH-ISY-EX-1507, Linköpings Universitet, S-581 83 Linköping.
|
|
[Mosskull, 1995]
 |
Nonlinear-observers for SI engine models. Åsa Mosskull (1995). Masters thesis, LiTH-ISY-EX-1505, Linköpings Universitet, S-581 83 Linköping.
|
Informationsansvarig: webmaster
Senast uppdaterad: 2021-11-10